ZDC-250TPSA
250T Die Casting Machine
Features
Locking force: 250Ton
Die height: 250-650mm
Tie bar distance: 580x580mm
Max. weight of shot: 2.55kgf
Max. casting area: 131~850cm2
Horsepower required: 30KVA
Specifications
| Main Item | Unit | ZDC-250TPSA | |||
| Locking Unit | Locking force | ton | 250 | ||
| Die platen dimension | mm | 850 x 800 | |||
| Tie bar distance | mm | 580 x 580 | |||
| Die height distance | mm | 250 ~ 650 | |||
| Die stroke | mm | 400 | |||
| Tie bar diameter | mm | Ø110 | |||
| Die adjustment speed | mm/min | 122(50HZ) | |||
| 148(60HZ) | |||||
| Ejecting unit | Ejecting force | ton | 18.5 | ||
| Ejecting stroke | mm | 90 | |||
| Core unit | Electromagnetic valve | PT | 3/8" x 1(set) | ||
| Oil outlet | PT | 1/4" x 2 (sets) | |||
| Electric system | Motor capacity voltage | KW | Pump 18.75 | ||
| Die adjustment 0.75 | |||||
| Power source | V | 220/380/415 (50/60HZ) | |||
| Capacity of power source | KVA | 30 | |||
| Shot unit | Shot force | ton | 11.3~37.3 | ||
| Max. shot speed(*) | M/Sec | 4.5(*6.0) | |||
| Plunger stroke | mm | 425 | |||
| Plunger tip penetration | mm | 195 | |||
| Plunger tip diameter | mm | Min Ø50 | Med Ø60 | Max Ø70 | |
| Casting Pressure | Kgf/cm2 | 576~1900 | 400~1320 | 294~970 | |
| Casting area | cm2 | 434~131 | 625~189 | 850~258 | |
| Net shot weight | Kgf | 1.30 | 1.87 | 2.55 | |
| Cooling water system | Cooling water inlet pipe diameter | PT | 1-1/4" | ||
| Die cooling water outlet pipe diameter (in & out) | PT | 1" x 1 (inlet) | |||
| 2" x 1 (outlet) | |||||
| Number of die cooling water adjusting valve cooling water | PC | 7 (inlet) | |||
| 8 (outlet) | |||||
| Die cooling water | Ltr/min | 30~60 | |||
| Hydraulic system | Die & ejecting pressure | Kgf/cm2 | 140;160 | ||
| Max. Intensified pressure of injection | Kgf/cm2 | 225~330 | |||
| Cycling oil volume | Ltr | 400 | |||
| Cooling water | Ltr/min | 40~50 (Water temp 25oC) | |||
| Machine relation | Machine size (LxWxH) | mm | 5500x1900x2800 | ||
| Machine weight | ton | 9 | |||
