Product

COLD CHAMBER DIE CASTING MACHINE - ZDC SERIES

ZDC-250TPSA, 250T Die Casting Machine

ZDC-250TPSA

250T Die Casting Machine

Features
Locking force: 250Ton
Die height: 250-650mm
Tie bar distance: 580x580mm
Max. weight of shot: 2.55kgf
Max. casting area: 850~258cm2
Horsepower required: 30KVA

Specifications

  Main Item Unit ZDC-250TPSA
Locking Unit Locking force ton 250
Die platen dimension mm 850 x 800
Tie bar distance mm 580 x 580
Die height distance mm 250 ~ 650
Die stroke mm 400
Tie bar diameter mm Ø110
Die adjustment speed mm/min 122(50HZ)
148(60HZ)
Ejecting unit Ejecting force ton 18.5
Ejecting stroke mm 90
Core unit Electromagnetic valve PT 3/8" x 1(set)
Oil outlet PT 1/4" x 2 (sets)
Electric system Motor capacity voltage KW Pump 18.75
Die adjustment 0.75
Power source V 220/380/415 (50/60HZ)
Capacity of power source KVA 30
Shot unit Shot force ton 11.3~37.3
Max. shot speed(*) M/Sec 4.5(*6.0)
Plunger stroke mm 425
Plunger tip penetration mm 195
Plunger tip diameter mm Min
Ø50
Med
Ø60
Max
Ø70
Casting Pressure Kgf/cm2 576~1900 400~1320 294~970
Casting area cm2 434~131 625~189 850~258
Net shot weight Kgf 1.30 1.87 2.55
Cooling water system Cooling water inlet pipe diameter PT 1-1/4"
Die cooling water outlet pipe diameter (in & out) PT 1" x 1 (inlet)
2" x 1 (outlet)
Number of die cooling
water adjusting valve cooling water
PC 7 (inlet)
8 (outlet)
Die cooling water Ltr/min 30~60
Hydraulic system Die & ejecting pressure Kgf/cm2 140;160
Max. Intensified pressure of injection Kgf/cm2 225~330
Cycling oil volume Ltr 400
Cooling water Ltr/min 40~50 (Water temp 25oC)
Machine relation Machine size (LxWxH) mm 5500x1900x2800
Machine weight ton 9