ZDC-2000TCM, 2000T Die Casting Machine


2000T Die Casting Machine

Locking force: 2000Ton
Die height: 650-1600mm
Tie bar distance: 1350x1350mm
Max. weight of shot: 30.3kgf
Max. casting area: 1617~3217cm2
Horsepower required: 190KVA

  Main Item Unit ZDC-2000TCM
Locking Unit Locking force ton 2000
Die platen dimension mm 1950 x 2170
Tie bar distance mm 1350 x 1350
Die height distance mm 650 ~ 1600
Die stroke mm 1400
Tie bar diameter mm Ø280
Die adjustment speed mm/min 66 (50HZ)
79 (60HZ)
Ejecting unit Ejecting force ton 65
Ejecting stroke mm 300
Core unit Electromagnetic valve PT 3/4" x 6(sets)
Oil outlet PT 3/4" x 12(sets)
Electric system Motor capacity voltage KW Pump 56.25X2(sets)
Power source V 220/380/415 (50/60HZ)
Capacity of power source KVA 190
Shot unit Shot force ton 110~140
Max. shot speed(*) M/Sec 6.0
Plunger stroke mm 1100
Plunger tip penetration mm 550
Plunger tip diameter mm Min Med Max
Ø120 Ø130 Ø140 Ø150
Casting Pressure Kgf/cm2 971~1237 828~1054 714~909 622~792
Casting area cm2 2059~1617 2416~1898 2802~2201 3217~2527
Net shot weight Kgf 19.4 22.8 26.4 30.3
Cooling water system Cooling water inlet pipe diameter PT 2"
Die cooling water outlet pipe diameter
(in & out)
PT 1-1/4" x 1 (inlet)
2-1/2" x 1 (outlet)
Number of die cooling
water adjusting valve cooling water
PC 20 (inlet)
20 (outlet)
Die cooling water Ltr/min 150~200
Hydraulic system Die & ejecting pressure Kgf/cm2 180
Max. Intensified pressure of injection Kgf/cm2 289~368
Cycling oil volume Ltr 2296
Cooling water Ltr/min 250 (Water temp 25oC)
Machine relation Machine size (LxWxH) mm 13645x5679x5275

Machine weight

ton 140

relevant information